LTC214、LTC212、LTC210、LTC208 Hydraulic vibratory rollers are manufactured according to international advanced technology and by use of imported components from abroad. The machine is a double drum tandem vibratory roller,It is Primarily used for the ompation of road bituminous course,sand gravel mixtures and RCC material,Being a universal compaction equipment for highway,municipal road,park area and industry ground etc.
Main Features
▲Full hydraulic two wheel drive and vibration.
▲Double frequency double viration system.
▲Hydrostatic center articulated steering,Optional unique crab agency.
▲Cabin with air conditooner,comfortable and spacious,the flexible steering seat facilicates the operation.
▲The driver's cabin can be turned on one side as a whole, to facilitate maintenace.
▲Fork-type frame,good hold-down property.
▲Hydraulic pump and vibrating motors are of the products made by American manufacturer SAUER or German manufacturer REXROTH.
Main technical parameters

Operating mass kg 14000/12000 10000/8000
Front axle load kg 7000/6000 5000/4000
Rear axle load kg 7000/6000 5000/4000
Static linear load N/cm 333/286 238/231
Form of frame   Fork-type(叉脚式) Fork-type(叉脚式)
Water tank capacity L 2×600 2×400
Fuel tank capacity L 154 80
Hydraulic tank capacity L 65 65
Vibration frequency mm    
High ampl.   0.8 0.67
Low ampl.   0.4 0.34
Vibration frequency Hz    
High ampl.   40 45
Low ampl.   46 50
Centrifugal force kN    
High ampl.   160×2 90×2
Low ampl.   90×2 69×2
Travel speed km/h 0-12 0-10
Turning radius mm 7000 6000
Grade ability % 40 40
Steering angle ° ±30 ±30
Drum diameter mm 1350 1150
Drum width mm 2100 1730
Transverse swing angle of the vibrating wheel ° ±8 ±8
Type of water spray mm Pressure Pressure
Wheelbase mm 3717 3217
Overall length mm 5060 4558
Overall width mm 2250 1840
Overall height mm 3300 2674
Ground clearance mm 324 258
Diesel model   康明斯 6BT5.9 康明斯 4BT3.9
Diesel power kw 110 75
Diesel speed r/min 2300 2400